Cutting blades are a kind of tool widely used in cutting operations of materials such as metal, stone, and ceramics. Their high efficiency and durability are favored by industrial production and daily use. So, how is a high-quality cutting blade produced? Here, Kechuang Abrasive will give you a detailed introduction to the manufacturing process of cutting blades from the aspects of raw material selection, formula design, mold forming, sintering process, quality inspection, etc.
1. Selection of raw materials
The core performance of cutting blades is determined by their main materials, which usually include three parts: abrasives, binders, and reinforcing materials.
- Abrasives: Determine the cutting ability of cutting blades. Commonly used abrasives include corundum, silicon carbide, and diamond. Corundum is suitable for hard metals, silicon carbide is suitable for brittle materials, and diamond abrasives are suitable for processing superhard materials.
- Binder: Used to fix abrasives together, common ones are resin binders and ceramic binders. Resin binders have good toughness and are suitable for high-speed cutting; ceramic binders have strong high temperature resistance and are suitable for continuous operation.
Reinforcement materials: such as fiberglass mesh, which plays a supporting role in cutting blades and improves the strength and safety of cutting blades.
2. Formula design and mixing
Based on the application requirements of the cutting disc, technical engineers will design the formula and reasonably adjust the ratio of abrasive, binder and reinforcement materials. For example, a cutting disc for metal cutting requires higher hardness, while a cutting disc for stone cutting requires stronger toughness and balance.
The various raw materials are then mixed according to the formula ratio. The mixing process requires high-precision equipment to ensure that the materials are evenly distributed, and a certain amount of lubricant or filler is added to enhance the subsequent molding effect.
3. Mold molding
The evenly mixed materials will be fed into the molding mold and pressed by a press. The molding process requires precise control of pressure, time and mold temperature to ensure that the cutting disc has uniform density and shape. The cut disc after molding is called a “green billet”. At this time, the cut disc does not have the ability to cut, but it has taken shape.
In order to enhance the stability of the cutting disc, glass fiber mesh or other reinforcement materials are usually embedded in the green billet at this stage.
4. Sintering and curing
After the green billet is formed, it needs to be hardened by high-temperature sintering or curing process.
- Sintering process: suitable for cutting discs with ceramic binders. The sintering temperature is usually above 1000℃, which makes the abrasive and the binder form a stronger bond.
- Curing process: Suitable for cutting discs with resin binders. The curing temperature is low, generally around 200℃. The resin is chemically reacted by heating to complete the hardening of the binder.
The sintered or cured cutting disc has been basically formed, but further processing is required to improve accuracy and performance.
5. Surface treatment and finishing
After sintering, the cutting disc will undergo a series of finishing processes:
- Trimming: Use professional equipment to trim the thickness and diameter of the cutting disc to ensure that it meets the design specifications.
- Balance correction: Use a dynamic balancer to detect the weight distribution of the cutting disc to ensure the stability of the cutting disc when rotating at high speed.
- Logo printing: Print specifications, models, brand logos and safe use information on the surface of the cutting disc.
6. Quality inspection
In order to ensure the safety and performance of the product, the cutting disc needs to undergo strict quality inspection before leaving the factory.
- Hardness test: Ensure the durability of the cutting disc when cutting different materials.
Impact test: Verify the cutting disc’s ability to resist breakage during high-speed operation. - Cutting effect test: Test the cutting efficiency, accuracy and life of the cutting disc in real scenarios.
- Balance test: Ensure that the cutting disc will not vibrate or affect operation due to eccentricity during high-speed operation.
7. Packaging and delivery
The cutting discs that pass the quality inspection will be packaged in categories to prevent damage during transportation. Usually, the cutting discs are packaged in single pieces or stacked in multiple pieces, with reinforced cartons or plastic protective shells on the outside. At the same time, product information and instructions for use are marked on the packaging to facilitate user selection and use.
Conclusion
The production and manufacturing process of cutting discs involves a variety of process technologies and strict quality control. From the careful selection of raw materials, to the precise control of the sintering process, to the final quality inspection, each link plays a vital role in the performance and safety of the cutting disc. Only after this series of complex process flows can the cutting disc have superior cutting performance and meet the various needs of users in industry and life.





