In the field of magnetic component manufacturing, Sendust magnetic cores play an important role due to their excellent soft magnetic properties, high permeability, and low core loss. However, due to the high hardness and brittleness of Sendust material, cutting Sendust magnetic rings requires special tools and techniques to avoid chipping, deformation, or burning. Among the available options, the resin cutting disc stands out as a highly effective solution for achieving smooth, precise, and burr-free cuts.
This article will discuss the features of Sendust, the challenges involved in cutting it, and how resin cutting discs are engineered to meet these demands with high efficiency and reliability.
What Is Sendust?
Sendust is a type of soft magnetic alloy composed primarily of iron (Fe), silicon (Si), and aluminum (Al). It was developed originally in the 1930s in Japan and has since been widely used in:
Power inductors
Transformer cores
Magnetic amplifiers
Switching power supplies
EMI suppression devices
Key Features of Sendust:
High magnetic permeability
Low core loss at high frequencies
Excellent temperature stability
Zero magnetostriction
Good corrosion resistance
However, despite its magnetic advantages, Sendust’s mechanical brittleness and abrasiveness make it challenging to process, especially in high-precision environments.
Challenges in Sendust Magnetic Ring Cutting
Cutting Sendust cores or rings poses a series of challenges due to their unique physical and material properties:
High Hardness:
Sendust has a high hardness level, which causes rapid tool wear and potential edge chipping during cutting.Brittle Nature:
The material tends to crack or fracture under improper cutting force or thermal stress.Dust Generation:
Fine metallic dust generated during cutting may be hazardous or contaminate work surfaces.Dimensional Accuracy:
Cutting must maintain the core’s dimensional integrity to ensure its magnetic performance is not compromised.
To handle these issues, cutting tools need to be both sharp and durable, capable of operating under high speed and pressure without generating excess heat. This is where resin-bonded cutting discs become the ideal choice.
Why Use Resin Cutting Discs for Sendust?
Resin cutting discs, also known as resin-bonded abrasive wheels, are manufactured by combining high-quality abrasive particles (such as aluminum oxide or silicon carbide) with resin binders. These discs are specifically engineered for clean, burr-free cutting of hard and brittle materials like Sendust, ferrite, and amorphous metals.
Advantages of Resin Cutting Discs:
Sharp & Efficient Cutting
Resin discs offer excellent initial sharpness, enabling fast and accurate penetration into dense magnetic cores without distortion.Low Cutting Temperature
The resin matrix helps absorb some of the heat, reducing thermal stress on the workpiece and minimizing the risk of burning or discoloration.Minimal Chipping
With optimized grain distribution and cutting performance, resin discs significantly reduce the risk of edge chipping.Ultra-Thin Options
Available in thicknesses as low as 0.2mm, these discs allow extremely fine slotting and cutting for miniature or high-precision Sendust rings.Customizability
Manufacturers like Kechuang Abrasive provide OEM & custom specs (e.g., diameter, thickness, bore size, hardness level) to suit different machine setups and application requirements.
Recommended Cutting Parameters
While exact cutting conditions depend on machine type and disc specification, here are general guidelines for using resin cutting discs on Sendust:
Peripheral Speed: 35–60 m/s
Feed Rate: Moderate, avoid forced feed to reduce breakage risk
Coolant: Dry or with low-pressure air (water/oil mist optional, based on machine capability)
Disc Thickness: 0.3–1.5 mm for most applications
Mounting: Ensure proper balancing and flat mounting of the disc to avoid vibration
Applications of Precision-Cut Sendust Rings
Precision cutting of Sendust magnetic rings is essential in many high-end applications, including:
Automotive electronics (e.g., inductors in EV battery systems)
Power supplies for medical equipment
High-frequency transformer cores
5G telecom base stations
Magnetic sensors and current transformers
A clean, burr-free cut ensures stable magnetic performance, reduced eddy current loss, and tight dimensional tolerance, all of which are critical in modern electronic systems.
Why Choose Kechuang Abrasive for Resin Cutting Discs?
Kechuang Abrasive is a professional manufacturer specializing in precision cutting solutions for magnetic materials, including:
Ferrite
Amorphous and nanocrystalline alloys
Silicon steel
Iron-nickel, iron-cobalt, and other soft magnetic materials
Customizable Specifications:
Outer Diameter: 22mm – 400mm
Thickness: 0.2mm – 3.0mm
Inner Hole: 2mm – 152mm
Type: Sharp type / Durable type / Balanced type
Bond Material: Resin / Hybrid / Metal on request
We support OEM, non-standard custom orders, and can provide cutting solutions tailored to your specific machines or production goals.
Contact Us
Email: kechuangyanmo@gmail.com
Website: https://kc-grinding.com
WhatsApp: +86 13528563836 (Victor)
Conclusion
When it comes to cutting Sendust magnetic rings, precision and edge quality are paramount. Resin cutting discs provide an optimal balance of sharpness, heat control, and surface finish, especially when dealing with brittle, high-performance magnetic alloys. By partnering with a trusted supplier like Kechuang Abrasive, manufacturers can achieve clean, accurate cuts with reduced risk and longer tool life—making their magnetic core processing safer, faster, and more cost-effective.

















